Quick info
bronze | hand-chased and hand-patinated | size 100 x 40 x 32 cm (h/w/d) | weight approx. 18.5 kg
Detailed description
Garden sculpture "Fox, Standing", bronze
He stretches as if he had not read Aesop's fable about the fox and the grapes, in which the sweet fruits remain out of reach. But perhaps the efforts of this bronze sculpture will be successful - it all depends on where it is placed in the garden.
Bronze sculpture, cast using the Lost-Wax-Process, chiselled and patinated by hand. Size 100 x 40 x 32 cm (h/w/d). Weight approx. 18.5 kg.
An alloy of copper with other metals (especially with tin) used since ancient times. It is an ideal metal for high-quality artistic castings, capable of enduring for millennia.
When casting bronze, the artist usually applies the lost-wax technique which is dating back more than 5000 years. This is the best, but also the most complex method of producing sculptures.
First, the artist forms a model of their work. This model is embedded in a liquid silicone rubber mass. Once the material has solidified, the model is cut out, leaving a negative mould. Liquid wax is then poured into the negative mould. After cooling down, the wax cast is removed from the mould, provided with sprues and dipped into ceramic mass. The ceramic mass is hardened in a kiln, where the wax melts away (lost mould).
Finally, the negative mould is ready, into which the 1400° C hot molten bronze is poured. After the bronze had cooled down, the ceramic shell is broken apart, reavoling the sculpture.
Next, the sprues are removed, the surfaces are polished, patinated and numbered by the artist or by a specialist, following their instructions. Thus, each casting is an original work.
For lower-quality bronze castings, the sand casting method is often used, which, however, does not achieve the results of a more elaborate lost-wax technique in terms of surface characteristics and quality.