Quick info
bronze | hand chased and patinated | size 20 x 41 x 35 cm (h/w/d) | weight approx. 4.2 kg | incl. mounting hardware
Detailed description
Garden sculpture "Raven Approaching" (without stone), bronze
The wisdom of ravens: Ravens are by far the most intelligent birds. They occupy a special place in mythology. The Norse god Odin, for example, has two of them permanently at his side: Hugin and Munin, who keep him informed about what is happening in the wide world. The names of these two companions, which are derived from the Old Norse words "thought" and "memory", testify to the respect that people had for the intelligence of the corvids in early times.
Bronze sculpture, cast using the Lost-Wax-Process, chiselled and patinated by hand. Size 20 x 41 x 35 cm (h/w/d). Weight approx. 4,2 kg. Can be fastened using the threaded pin supplied. Without stone.
An alloy of copper with other metals (especially with tin) used since ancient times. It is an ideal metal for high-quality artistic castings, capable of enduring for millennia.
When casting bronze, the artist usually applies the lost-wax technique which is dating back more than 5000 years. This is the best, but also the most complex method of producing sculptures.
First, the artist forms a model of their work. This model is embedded in a liquid silicone rubber mass. Once the material has solidified, the model is cut out, leaving a negative mould. Liquid wax is then poured into the negative mould. After cooling down, the wax cast is removed from the mould, provided with sprues and dipped into ceramic mass. The ceramic mass is hardened in a kiln, where the wax melts away (lost mould).
Finally, the negative mould is ready, into which the 1400° C hot molten bronze is poured. After the bronze had cooled down, the ceramic shell is broken apart, reavoling the sculpture.
Next, the sprues are removed, the surfaces are polished, patinated and numbered by the artist or by a specialist, following their instructions. Thus, each casting is an original work.
For lower-quality bronze castings, the sand casting method is often used, which, however, does not achieve the results of a more elaborate lost-wax technique in terms of surface characteristics and quality.